To place an order, call
800-323-2439 or 214-340-0265

10557 Metric Drive
Dallas, TX 75243
Ph: 800-323-2439 or
Fx: 214-340-5870
20 MHz Dual-Channel Scope with Maximum Sensitivity

The GOS-622G oscillocope is a dual-channel oscilloscope with a maximum sensitivity of 1 mV/DIV and a maximum sweep time of 10 nSec/DIV. This oscilloscope employs a 6-inch rectangular type cathode-ray tube with red internal graticule.


  • 20 MHz, Dual Channel
  • High sensitivity 1mV/DIV
  • TV Synchronization
  • Z axis input
  • ALT Triggering Function
  • Hold Off Function
  • CH1 output



  Type   6-inch rectangular type with
  internal graticule 8 x 10 DIV
  (1 DIV=1 cm)
  Z-axis input   Input Impedance: Approx. 5k Ohms
  Sensitivity: Above 3Vp-p
  Bandwidth: DC ~ 5MHz
  Vertical System
  Sensitivity   5mV ~ 5V / DIV ±3%, 1mV ~ 2mV /
  DIV ±5%
  Bandwidth   DC ~ 20MHz
  Input Impedance   Approx. 1M Ohms
  Input Coupling   AC, DC, GND
  Vertical Mode   CH1, CH2, DUAL, ADD, CH2 INV
  (Dual automatic switching ALT
  and CHOP)
   Horizontal System
  Sweep Time   0.1µS ~ 0.5S / DIV ±3%; 100nS ~ 50mS /
  DIV ±5%  (x 10MAG); 10nS ~ 50nS ±8%
  (x 10MAG)
  Trigger Mode   AUTO, NORM
  Trigger Source   CH1, CH2, ALT, LINE, EXT
  Trigger Coupling   AC, DC, HF, REJ, TV
  Trigger Slope   "+" or "-"
  X-Y Operation
  Sensitivity   5mV ~ 5V / DIV ±4%
  X-axis Bandwidth   DC ~ 1MHz
  Phase Error   3° or less from DC ~ 50kHz
  Output Signal
  Trigger Signal
  Voltage: approx. 50mV/
  DIV into 50 Ohms
  Calibrator Output   1kHz Squarewave, 2Vpp ±2%
  Power cord x 1; Instruction manual x 1; Probes(10:1/1:1) x 2
  Dimensions and Weights
  310(W) x 150(H) x 455(D) mm; Approx. 8.2kg


Price $395.00