To place an order, call
800-323-2439 or 214-340-0265

10557 Metric Drive
Dallas, TX 75243
Ph: 800-323-2439 or
Fx: 214-340-5870
60 MHz DSO 100 MSa/s, Color

The GDS-806C is a useful, 2 channel digital storage oscilloscope including: up to 10ns peak detection for glitch capture, a large 5.7” mono or color LCD display, two input channels - each with a record length of 125k points and 8 bits vertical resolution, a time base of 1ns/div~10s/div., a 6-digit trigger frequency counter and much more.


  • 60MHz Bandwidth With  COLOR  Display
  • 125k Memory and 12 Division Horizontal Display
  • 25GS/s Sampling Rate for Repetitive Waveforms
  • Advanced Trigger: Pulse Width, TV Line, Event Delay and Time Delay
  • Go/NoGo , Auto Setup Sequence and TTF Function
  • Built-In Help Menu, Multi-Language and  FREE PC Software
  • Standard Interface: RS-232C
  • Optional Interface: GPIB, Printer Port and USB 2.0



  Display System
  Display Device   Color (320 x 240)
  Display Contrast   Adjustable
  8 x 10 divisions (8 x 12 when menu off)
 Vertical System
  Bandwidth   60MHz
  Channels   2
  8 bit
  2mV/div ~ 5V/div
  ± 3%
  Rise Time  <5.8ns
  Input Coupling   AC, DC, Ground
  Input Impedance   1M Ohms ±2% , ~18pF
  Polarity   Normal and Invert
  Max. Voltage
  Between Signal
  & common at
  Input BNC
  300V (DC+AC peak) , CATII
  CH1 + CH2, CH1 - CH2, FFT
  Offset Range   2mV/div~50mV/div : ±0.5V;
  1V/div~5V/div : ±50V
  BW Limit   20MHz ( -3dB )
  Horizontal System
  Time Base
  1ns/div ~ 10s/div (1-2-5 increments ),
  Roll: 250ms/div ~ 10s/div
  Time Base Mode   Main, Window, Window Zoom, Roll, X-Y
  Time Base
  ± 0.01%
  Delay Range   Pre-trigger: 20 div
  Signal Acquisition
  Sample Rate
  100MS/s maximum on each channel
  Sample Rate
  25GS/s E.T. maximum on each channel
  Record Length   125h/CH
  Peak Detection   10ns (500ns/div ~ 10s/div)
  Sample, Peak Detect, Average
  Average   2, 4, 8, 16, 32, 64, 128, 256
  Source   CH1, CH2, Line, Ext
  Mode   Auto Level, Auto, Normal, Single,
  TV, Time Delay, Event Dela, Edge,
  Pulse Width, AC, DC, HF, LF,
  Noise Reject
  Coupling   AC, DC, HF, LF, Noise Reject
  Sensitivity   DC~25MHz:Approximate 0.5div or
  5mV 25MHz~60MHz:
  Approximate 1.5div or 15mV
  X-Y Mode
  X-Axis Input/
  Y-Axis Input
  Channel 1/
  Channel 2
  Phase Shift   ±3° at 100kHz
 Cursor and Measurement
  Auto Voltage
  Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin
  Auto Time
  Frequency, Period, Rise Time, Fall Time,
  Positive Width,Negative Width, duty cycle

  Voltage difference between cursors
  (ΔV), Time difference between cursors   (ΔT), Frequency difference between

 Frequency Counter


  25GS/s E.T. maximum on each channel

  Signal Source   10ns (500ns/div ~ 10s/div)
  Adjustable Probe
  1 kHz ~ 100 kHz 1KHz / STEP
  Calibration Cycle
   Duty Cycle   5% ~ 95% 5% / STEP
  External Trigger
  Range   ±15V
  Sensitivity   DC~25MHz: Approximate 0.5div or 5mV
  25MHz~60MHz: Approximate
 1M Ohm ± 2%, ~ 18pF
  Maximum Input   300V ( DC + AC peak ) , CATII
  Control Panel Function
  AutoSet   Autoset can adjust vertical ( Volt/div ),
  Horizontal ( Sec/div) and Trigger level
  Save/Recall   Up to 15 sets of measurement
  conditions can be saved and recalled
  Waveform Trace
  2 sets of waveform can be saved and
  Standard   RS-232C
  Optional Opt. 01   GPIB Interface
  Optional Opt. 11   USB, Printer Port, Go/NoGo Output
  Instruction Manual x 1, Power Cord x 1, Probe x 2
  Power Source
  100V ~ 240V AC 47Hz ~ 63Hz, Auto selection
  Dimensions and Weights
  310W x 142H x 254D (mm), Approximate 4.1kg


Price $935.00