To place an order, call
800-323-2439 or 214-340-0265


10557 Metric Drive
Dallas, TX 75243
Ph: 800-323-2439 or
214-340-0265
Fx: 214-340-5870
GOS-653G
50 MHz Dual-Channel Scope with Delayed Sweep

The GOS-653G is a dual-channel oscilloscope with a maximum sensitivity of 1 mV/DIV and a maximum sweep time of 10 nSec/DIV. This oscilloscope employs a 6-inch rectangular type cathode-ray tube with red internal graticule.

Features

  • 50 MHz, Dual Channel
  • Delayed Sweep
  • Built-in Delay Line
  • TV Synchronization
  • Z axis input
  • ALT Triggering Function
  • Hold off Function
  • Trigger level lock function
  • CH1 output


Specifications

  CRT
  Type   6-inch rectangular type with internal
  graticule; 0%, 10%, 90% and 100%
  markers. 8 x 10 DIV (1 DIV=1 cm)
  Phosphor   P31
  Accelerating
  Potential
  12 kV
  Illumination   Continuously adjustable
  Z-axis input   Input Impedance : Approx. 5k Ohm
  Sensitivity: Above 3Vp-p
  Bandwidth: DC ~ 5MHz
  Vertical System
  Sensitivity   5mV ~ 5V/DIV ±3%, 1mV ~ 2mV/
  DIV ±5%
  Bandwidth   DC ~ 50MHz
  DC ~ 15MHz at 1mV ~ 2mV/DIV
  Rise Time   7nS (23.3nS at 1mV ~ 2mV/DIV)
  Signal Delay   Leading edge can be monitored
  Input
  Impedance
  Approx. 1M Ohm
  Input Coupling   AC, DC, GND
  Vertical Mode   CH1, CH2, DUAL, CH2 INV, ADD.
  (Dual automatic switching ALT
  and CHOP)
  Horizontal System
  A (main)
  Sweep Time

  0.1µS ~ 0.5S / DIV ±3%,
  100nS ~ 50mS / DIV ±5% (x 10MAG),
  10nS ~ 50nS/DIV ±8% (x 10MAG)

  B (delay)
  Sweep Time

  0.1µS ~ 0.5mS / DIV ±3%,
  100nS ~ 50µS / DIV ±5% (x 10MAG),
  10nS ~ 50nS / DIV ±8% (x 10MAG)

  Delay Time   1µS ~ 5mS, ±5%
  Delay Time
  Jitter
  Better than 1:10000
  Trigger
  Trigger Mode   AUTO, NORM, SINGLE
  Trigger Source   CH1, CH2, ALT, LINE, EXT
  Trigger
  Coupling
  AC, DC, HR, REJ, TV
  Trigger Slope   "+" or "-"
  X-Y Operation
  Sensitivity   5mV ~ 5V / DIV ±4%
  X-axis
  Bandwidth
  DC ~ 2MHz
  Phase Error   3º or less from DC ~ 100kHz
  Output Signal
  Trigger Signal
  Output
  Voltage: approx. 50mV / DIV into 50 Ohms
  Calibrator
  Output
  1kHz Squarewave, 2Vpp ±2%
  Power Source
  AC 100V / 120V / 220V / 230V ± 10%, 50 / 60Hz
  Accessories
  Power cord x 1; Instruction manual x 1 ; Probes(10:1/1:1)x2
  Dimensions and Weight
  310(W) x 150(H) x 455(D) mm; Approx. 8.2kg

 

Price $399.00